VF1 – Rollotop “Standard” – roller standing by the pool

vf1 típusú medence takaró elhelyezés
VF1

Above the water surface

A simple and cost-effective solution to cover small and mid-sized pools.

It can be installed on existing pools without modifying their structure. The roll-up mechanism occupies little space and looks nice without any cover of its own.

  • simple and fast to install
  • strong price to value ratio
  • for pools not larger than 5x10 metres
  • recommended for existing indoor pools
  • Price: from 944.600,-HUF+VAT (for 7x3m pools)
Request an offer

VF2 – Rollotop “Maxi” – roller standing by the pool

vf2 típusú medence takaró elhelyezés
VF2

Above the water surface

This model is recommended for larger pools, and where the roller should be hidden under a wooden cover. Similarly to Rollotop’s “Standard” product, this model can also be installed simply and rapidly on most existing pools.

  • simple and fast to install
  • for large pools (up to 16x25 m)
  • recommended for existing outdoor pools
  • an ideal match with solar and transparent profiles
  • Price:  from 1.124.600,-HUF+VAT (for 7x3m pools)
Request an offer

VA2 – Rollotop “Deep” – roller hidden in a groove at the bottom

va2 típusú medence takaró elhelyezés
VA2

Below the water surface

Rollotop “Deep” is one of the most elegant models. The profiles are rolled up in a groove at the bottom of the pool, leaving the entire length and depth of the pool free for use, i.e. the rolled-up profiles do not take up useful water space. This model is ideal for indoor pools because it allows for maximising the utilisation of limited space. Consequently, the pool to be built can be up to one metre longer compared to other cover systems.

  • hidden design
  • only for pools in the design phase
  • recommended for indoor pools
  • several chamber covers to choose from
  • does not reduce useful pool length
  • Price: from 1.682.350,-HUF+VAT (for 7x3m pools)
Request an offer

VA1 – Rollotop “Bottom” – roller placed at the bottom of the pool

va1 típusú medence takaró elhelyezés
VA1

Below the surface

This model is installed near the bottom of the pool or at medium height, at the end of the pool. The free-standing, uncovered roller can be used as a sitting bench when rolled up. This cover system is simple to install in an existing pool in a discreet manner.

  • simple to install
  • recommended for outdoor pools
  • the rolled-up profiles can be used as a sitting bench
  • Price: from 1.559.500,- HUF+VAT (for 7x3m pools)
Request an offer

VA6 – Rollotop “Recess” – roller hidden in a wall recess

va6 típusú medence takaró elhelyezés
VA6

Below the surface

The only recessed model that does not require the recess to be covered; consequently, the roll recess is easier to clean. The rolled-up profiles do not reduce the useful length of the pool, leaving the entire pool ready for use.

  • only for pools in the design phase
  • recommended for outdoor pools
  • no recess cover necessary
  • roller recess easy to clean
  • does not reduce useful pool length
  • Price: from 1.571.750,- HUF+VAT (for 7x3m pools)
Request an offer

VA3 – Rollotop “Relax” – roller hidden below a pad

va3 típusú medence takaró elhelyezés
VA3

Below the surface

The roller is hidden below an 80 cm wide pad to sit or lie on, installed 15-45 cm below the water surface. The pad can be used for sunbathing or as a paddling place for small children. This model can be considered as another version of the Rollotop “Sundeck” for deck-level swimming pools.

  • hidden design
  • roller cover can be used as a sunning or paddling place
  • only for pools in the design phase
  • recommended for outdoor pools
  • several chamber covers to choose from
  • recommended for deck-level or overflowing pools
  • Price: from 1.489.700,- HUF+VAT (for 7x3 pools)
Request an offer

VA4/VA4C – Rollotop “Simple” – roller below the water surface

va4 típusú medence takaró elhelyezés
VA4/VA4C

Below the surface

As the name implies, this is the simplest underwater roll-up system. It’s suitable for existing pools as it is simply hung below the water surface.

  • for both outdoor and indoor pools
  • recommended for existing pools
  • simple to install
  • roller can serve as a sitting pad
  • side-mounted motor, no shaft necessary
  • Price: from 1.419.500,- HUF+VAT (for 7x3m pools)
Request an offer

VA9/VA9C – Rollotop “Sundeck” – roller hidden in an upper chamber

va9 típusú medence takaró elhelyezés
VA9/VA9C

Below the surface

In this case, the roller is installed in a chamber covered with a tropical wood or stone panel, which looks especially attractive if matched to the surface of the sun deck next to the pool; in this case, the door of the roller chamber perfectly blends into its environment. This solution does not reduce the length of the pool as the chamber is located at the end but outside of it.

  • hidden design
  • for outdoor and indoor pools
  • only for pools in the design phase
  • chamber door can be used as a sun deck
  • several chamber covers to choose from
  • Price: from 1.489.700,-HUF+VAT (for 7x3m pools)
Request an offer

VA8 – Rollotop “Ellipse” – roller hidden in the pool bottom, with an automatic cover

va8 típusú medence takaró elhelyezés
VA8

Below the surface, 0.3 – 0.5 m high.

The Rollotop “Ellipse” model is suitable to cover oval, trapezoid, parallelogram-shaped and certain other custom-shaped pools. A roller chamber below the pool bottom is covered with a motor-driven cover board. This board is opened with a push of a button, and the roller emerges.

  • hidden design
  • for outdoor and indoor pools
  • only for pools in the design phase
  • does not reduce useful pool length
  • several chamber covers to choose from
  • Price: custom offer
Request an offer

VF1 – Rollotop “Standard” – roller standing by the pool

vf1 típusú medence takaró elhelyezés
VF1

Above the water surface

A simple and cost-effective solution to cover small and mid-sized pools.

It can be installed on existing pools without modifying their structure. The roll-up mechanism occupies little space and looks nice without any cover of its own.

  • simple and fast to install
  • strong price to value ratio
  • for pools not larger than 5x10 metres
  • recommended for existing indoor pools
  • Price: from 944.600,-HUF+VAT (for 7x3m pools)
Request an offer

VA2 – Rollotop “Deep” – roller hidden in a groove at the bottom

va2 típusú medence takaró elhelyezés
VA2

Below the water surface

Rollotop “Deep” is one of the most elegant models. The profiles are rolled up in a groove at the bottom of the pool, leaving the entire length and depth of the pool free for use, i.e. the rolled-up profiles do not take up useful water space. This model is ideal for indoor pools because it allows for maximising the utilisation of limited space. Consequently, the pool to be built can be up to one metre longer compared to other cover systems.

  • hidden design
  • only for pools in the design phase
  • recommended for indoor pools
  • several chamber covers to choose from
  • does not reduce useful pool length
  • Price: from 1.682.350,-HUF+VAT (for 7x3m pools)
Request an offer

VA1 – Rollotop “Bottom” – roller placed at the bottom of the pool

va1 típusú medence takaró elhelyezés
VA1

Below the surface

This model is installed near the bottom of the pool or at medium height, at the end of the pool. The free-standing, uncovered roller can be used as a sitting bench when rolled up. This cover system is simple to install in an existing pool in a discreet manner.

  • simple to install
  • recommended for outdoor pools
  • the rolled-up profiles can be used as a sitting bench
  • Price: from 1.559.500,- HUF+VAT (for 7x3m pools)
Request an offer

VA4/VA4C – Rollotop “Simple” – roller below the water surface

va4 típusú medence takaró elhelyezés
VA4/VA4C

Below the surface

As the name implies, this is the simplest underwater roll-up system. It’s suitable for existing pools as it is simply hung below the water surface.

  • for both outdoor and indoor pools
  • recommended for existing pools
  • simple to install
  • roller can serve as a sitting pad
  • side-mounted motor, no shaft necessary
  • Price: from 1.419.500,- HUF+VAT (for 7x3m pools)
Request an offer

VA9/VA9C – Rollotop “Sundeck” – roller hidden in an upper chamber

va9 típusú medence takaró elhelyezés
VA9/VA9C

Below the surface

In this case, the roller is installed in a chamber covered with a tropical wood or stone panel, which looks especially attractive if matched to the surface of the sun deck next to the pool; in this case, the door of the roller chamber perfectly blends into its environment. This solution does not reduce the length of the pool as the chamber is located at the end but outside of it.

  • hidden design
  • for outdoor and indoor pools
  • only for pools in the design phase
  • chamber door can be used as a sun deck
  • several chamber covers to choose from
  • Price: from 1.489.700,-HUF+VAT (for 7x3m pools)
Request an offer

VA8 – Rollotop “Ellipse” – roller hidden in the pool bottom, with an automatic cover

va8 típusú medence takaró elhelyezés
VA8

Below the surface, 0.3 – 0.5 m high.

The Rollotop “Ellipse” model is suitable to cover oval, trapezoid, parallelogram-shaped and certain other custom-shaped pools. A roller chamber below the pool bottom is covered with a motor-driven cover board. This board is opened with a push of a button, and the roller emerges.

  • hidden design
  • for outdoor and indoor pools
  • only for pools in the design phase
  • does not reduce useful pool length
  • several chamber covers to choose from
  • Price: custom offer
Request an offer

VF2 – Rollotop “Maxi” – roller standing by the pool

vf2 típusú medence takaró elhelyezés
VF2

Above the water surface

This model is recommended for larger pools, and where the roller should be hidden under a wooden cover. Similarly to Rollotop’s “Standard” product, this model can also be installed simply and rapidly on most existing pools.

  • simple and fast to install
  • for large pools (up to 16x25 m)
  • recommended for existing outdoor pools
  • an ideal match with solar and transparent profiles
  • Price:  from 1.124.600,-HUF+VAT (for 7x3m pools)
Request an offer

VA6 – Rollotop “Recess” – roller hidden in a wall recess

va6 típusú medence takaró elhelyezés
VA6

Below the surface

The only recessed model that does not require the recess to be covered; consequently, the roll recess is easier to clean. The rolled-up profiles do not reduce the useful length of the pool, leaving the entire pool ready for use.

  • only for pools in the design phase
  • recommended for outdoor pools
  • no recess cover necessary
  • roller recess easy to clean
  • does not reduce useful pool length
  • Price: from 1.571.750,- HUF+VAT (for 7x3m pools)
Request an offer

VA3 – Rollotop “Relax” – roller hidden below a pad

va3 típusú medence takaró elhelyezés
VA3

Below the surface

The roller is hidden below an 80 cm wide pad to sit or lie on, installed 15-45 cm below the water surface. The pad can be used for sunbathing or as a paddling place for small children. This model can be considered as another version of the Rollotop “Sundeck” for deck-level swimming pools.

  • hidden design
  • roller cover can be used as a sunning or paddling place
  • only for pools in the design phase
  • recommended for outdoor pools
  • several chamber covers to choose from
  • recommended for deck-level or overflowing pools
  • Price: from 1.489.700,- HUF+VAT (for 7x3 pools)
Request an offer

VA4/VA4C – Rollotop “Simple” – roller below the water surface

va4 típusú medence takaró elhelyezés
VA4/VA4C

Below the surface

As the name implies, this is the simplest underwater roll-up system. It’s suitable for existing pools as it is simply hung below the water surface.

  • for both outdoor and indoor pools
  • recommended for existing pools
  • simple to install
  • roller can serve as a sitting pad
  • side-mounted motor, no shaft necessary
  • Price: from 1.419.500,- HUF+VAT (for 7x3m pools)
Request an offer

VA9/VA9C – Rollotop “Sundeck” – roller hidden in an upper chamber

va9 típusú medence takaró elhelyezés
VA9/VA9C

Below the surface

In this case, the roller is installed in a chamber covered with a tropical wood or stone panel, which looks especially attractive if matched to the surface of the sun deck next to the pool; in this case, the door of the roller chamber perfectly blends into its environment. This solution does not reduce the length of the pool as the chamber is located at the end but outside of it.

  • hidden design
  • for outdoor and indoor pools
  • only for pools in the design phase
  • chamber door can be used as a sun deck
  • several chamber covers to choose from
  • Price: from 1.489.700,-HUF+VAT (for 7x3m pools)
Request an offer

VA8 – Rollotop “Ellipse” – roller hidden in the pool bottom, with an automatic cover

va8 típusú medence takaró elhelyezés
VA8

Below the surface, 0.3 – 0.5 m high.

The Rollotop “Ellipse” model is suitable to cover oval, trapezoid, parallelogram-shaped and certain other custom-shaped pools. A roller chamber below the pool bottom is covered with a motor-driven cover board. This board is opened with a push of a button, and the roller emerges.

  • hidden design
  • for outdoor and indoor pools
  • only for pools in the design phase
  • does not reduce useful pool length
  • several chamber covers to choose from
  • Price: custom offer
Request an offer

VF1 – Rollotop “Standard” – roller standing by the pool

vf1 típusú medence takaró elhelyezés
VF1

Above the water surface

A simple and cost-effective solution to cover small and mid-sized pools.

It can be installed on existing pools without modifying their structure. The roll-up mechanism occupies little space and looks nice without any cover of its own.

  • simple and fast to install
  • strong price to value ratio
  • for pools not larger than 5x10 metres
  • recommended for existing indoor pools
  • Price: from 944.600,-HUF+VAT (for 7x3m pools)
Request an offer

VF2 – Rollotop “Maxi” – roller standing by the pool

vf2 típusú medence takaró elhelyezés
VF2

Above the water surface

This model is recommended for larger pools, and where the roller should be hidden under a wooden cover. Similarly to Rollotop’s “Standard” product, this model can also be installed simply and rapidly on most existing pools.

  • simple and fast to install
  • for large pools (up to 16x25 m)
  • recommended for existing outdoor pools
  • an ideal match with solar and transparent profiles
  • Price:  from 1.124.600,-HUF+VAT (for 7x3m pools)
Request an offer

VA1 – Rollotop “Bottom” – roller placed at the bottom of the pool

va1 típusú medence takaró elhelyezés
VA1

Below the surface

This model is installed near the bottom of the pool or at medium height, at the end of the pool. The free-standing, uncovered roller can be used as a sitting bench when rolled up. This cover system is simple to install in an existing pool in a discreet manner.

  • simple to install
  • recommended for outdoor pools
  • the rolled-up profiles can be used as a sitting bench
  • Price: from 1.559.500,- HUF+VAT (for 7x3m pools)
Request an offer

VA4/VA4C – Rollotop “Simple” – roller below the water surface

va4 típusú medence takaró elhelyezés
VA4/VA4C

Below the surface

As the name implies, this is the simplest underwater roll-up system. It’s suitable for existing pools as it is simply hung below the water surface.

  • for both outdoor and indoor pools
  • recommended for existing pools
  • simple to install
  • roller can serve as a sitting pad
  • side-mounted motor, no shaft necessary
  • Price: from 1.419.500,- HUF+VAT (for 7x3m pools)
Request an offer

VA2 – Rollotop “Deep” – roller hidden in a groove at the bottom

va2 típusú medence takaró elhelyezés
VA2

Below the water surface

Rollotop “Deep” is one of the most elegant models. The profiles are rolled up in a groove at the bottom of the pool, leaving the entire length and depth of the pool free for use, i.e. the rolled-up profiles do not take up useful water space. This model is ideal for indoor pools because it allows for maximising the utilisation of limited space. Consequently, the pool to be built can be up to one metre longer compared to other cover systems.

  • hidden design
  • only for pools in the design phase
  • recommended for indoor pools
  • several chamber covers to choose from
  • does not reduce useful pool length
  • Price: from 1.682.350,-HUF+VAT (for 7x3m pools)
Request an offer

VA6 – Rollotop “Recess” – roller hidden in a wall recess

va6 típusú medence takaró elhelyezés
VA6

Below the surface

The only recessed model that does not require the recess to be covered; consequently, the roll recess is easier to clean. The rolled-up profiles do not reduce the useful length of the pool, leaving the entire pool ready for use.

  • only for pools in the design phase
  • recommended for outdoor pools
  • no recess cover necessary
  • roller recess easy to clean
  • does not reduce useful pool length
  • Price: from 1.571.750,- HUF+VAT (for 7x3m pools)
Request an offer

VA3 – Rollotop “Relax” – roller hidden below a pad

va3 típusú medence takaró elhelyezés
VA3

Below the surface

The roller is hidden below an 80 cm wide pad to sit or lie on, installed 15-45 cm below the water surface. The pad can be used for sunbathing or as a paddling place for small children. This model can be considered as another version of the Rollotop “Sundeck” for deck-level swimming pools.

  • hidden design
  • roller cover can be used as a sunning or paddling place
  • only for pools in the design phase
  • recommended for outdoor pools
  • several chamber covers to choose from
  • recommended for deck-level or overflowing pools
  • Price: from 1.489.700,- HUF+VAT (for 7x3 pools)
Request an offer

VA9/VA9C – Rollotop “Sundeck” – roller hidden in an upper chamber

va9 típusú medence takaró elhelyezés
VA9/VA9C

Below the surface

In this case, the roller is installed in a chamber covered with a tropical wood or stone panel, which looks especially attractive if matched to the surface of the sun deck next to the pool; in this case, the door of the roller chamber perfectly blends into its environment. This solution does not reduce the length of the pool as the chamber is located at the end but outside of it.

  • hidden design
  • for outdoor and indoor pools
  • only for pools in the design phase
  • chamber door can be used as a sun deck
  • several chamber covers to choose from
  • Price: from 1.489.700,-HUF+VAT (for 7x3m pools)
Request an offer

VA8 – Rollotop “Ellipse” – roller hidden in the pool bottom, with an automatic cover

va8 típusú medence takaró elhelyezés
VA8

Below the surface, 0.3 – 0.5 m high.

The Rollotop “Ellipse” model is suitable to cover oval, trapezoid, parallelogram-shaped and certain other custom-shaped pools. A roller chamber below the pool bottom is covered with a motor-driven cover board. This board is opened with a push of a button, and the roller emerges.

  • hidden design
  • for outdoor and indoor pools
  • only for pools in the design phase
  • does not reduce useful pool length
  • several chamber covers to choose from
  • Price: custom offer
Request an offer